Thank you for using this card asset <3 - Garn Servo
If you did not get it for yourself here's the link: https://garnservo.gumroad.com/l/GarnCard
If you experience any installation or usage issues, contact me via my Discord: https://discord.gg/BVEmHk5GtW
Please do not forget to rate the asset on Gumroad, it really helps!

----------------------------------

Card Customisation:
1. In '!GarnServo/Card/!Resources/Mat+Text' there is a Photoshop file named '!PHOTOSHOPCard.psd'
2. Freely edit this file with any textures you desire.
3. In the Discord folder of the .psd file there is a textbox set up for you to input your own Discord tag e.g. 'USERNAME#0001'
	This textbox is already centred so it should be pretty quick and easy to input your own username.
4. Save your edited textures overwriting the existing ones that you wish to replace (e.g. overwite the Discord one by naming it 'DesFour.png')

----------------------------------

VRFury Installation:
1. Drop 'VRCFury Card' on your avatar in the hierarchy, right click, Unpack prefab completely.
2. Open up the avatar to access CardLH and CardRH.
3. In your scene view, position CardRH until the bottom-right corner of the card rests on the pad of your thumb.
4. Select GarnCard, and change the parent constraint from CardRH to CardLH.
5. In your scene view, position CardLH until the bottom-left corner of the card rests on the pad of your thumb.
6. Disable the Mesh Renderer on GarnCard, and ensure it's child objects (Con.CardL/R) are disabled.
7. Test in Play mode, or upload.

(Known Issues: Some gesture weirdness, and some world constraint weirdness. - Only when installed via VRCFury, as of 7/2023)

Manual Installation:
1. Drag the CardContainer prefab (located in !GarnServo/Card/Manual Install) into your hierarchy onto your avatar. Rick click, Unpack the prefab completely.
2. Open up the avatar to access CardLH and CardRH.
3. In your scene view, position CardRH until the bottom-right corner of the card rests on the pad of your thumb.
4. Select GarnCard, and change the parent constraint from CardRH to CardLH.
5. In your scene view, position CardLH until the bottom-left corner of the card rests on the pad of your thumb.
6. Test in Play mode, or upload.
7. In the hierarchy, move 'CardLH' to the distal (last) left thumb bone on your avatars armature. Repeat this with 'CardRH' with your right thumb bone.
8. Using the VRLabs Avatars 3.0 Manager, merge 'FX Card' with your FX layer.
9. In the parameters tab of the VRLabs Avatars 3.0 Manager, merge "Params Card' with your parameters.
10. Using the VRLabs Avatars 3.0 Manager, merge 'CardGesture' with your gesture layer.
12. In your avatars main menu, add a new control. Name it 'Cards', set the icon to "Icon_MenuCard", set the type to Sub-Menu and set the sub-menu as 'CardMenu'.
12. Disable the Mesh Renderer on GarnCard, and ensure it's child objects (Con.CardL/R) are disabled.
13. Test with Av3.0 Emulator, and upload.

TROUBLESHOOTING FAQ:
1. Make sure all parameters are correctly copied from 'CardFX' to your own FX layer, from 'CardGesture' to your own Gesture layer, and from 'CardParams' to your own parameters. If this is not the case, the system will not work as intended.
2. Make sure you have thoroughly tested (with Lyuma Emulator) the position of the card in both hands. If this is not done, the card WILL be in a very weird location in your hand.

If there are any issues you experience that have not been resolved with this troubleshooting section, contact me on Discord:
https://discord.gg/BVEmHk5GtW